Spread the love

Regular maintenance of its private pool is essential to enjoy a pleasant environment, but it is also a matter of hygiene. To do this, we have an exciting choice of vacuum cleaners for the pool, capable of eliminating plant debris and other dust that regularly stains the water in the pool. It is essential to know how it works and the price to choose a pool vacuum cleaner suited to your needs and budget.

Pool Vacuum Cleaner For Crystal Clear Water And A Shiny Pool

Step by step how to install a suction pool cleaner is explained below. The procedure for manual suction pool cleaners and automatic suction pool cleaners is similar, so the instructions can be used universally.

How To Install A Suction Pool Cleaner

  1. Assembly

Before installing the suction pool cleaner, mount it according to the operating instructions. With the manual pool vacuum, the vacuum head is installed on the telescopic rod. An automatic pool vacuum cleans the pool as a separate unit, so it does not need to be installed on a telescopic pole.

  1. Set up the filter system

Install the filter pump according to the instruction manual. Connect the two hoses to the water inlet and drain in the pool. Start the filter system now and let it run for approximately 10 to 15 minutes before installing the pool vacuum.

  1. Prepare the skimmer

Now the suction plate is inserted into the skimmer. Often this plate is also called Skim Vac or Vacuumscheibe. It acts as an adapter to install the hose.

  1. Connect the pool vacuum with a hose

As a general rule, the pool vacuum is supplied with a corresponding hose. This can also be purchased separately. Now you can install the hose to the pool vacuum. Depending on the model, the hose is attached to the suction cup with a clamp.

  1. Leave the pool vacuum in the water

After the piglet has been mounted and installed to the suction hose, it can be left in the water. Press the nipple down with the telescopic rod or slowly lower the automatic pool suction into the water.

  1. Fill the suction hose with water

Now the hose is placed in the pool. This step is important for the air to escape and the hose to contain enough water. Tip: Start at the end of the hose and submerge it piece by piece vertically in the water.

  1. Connect the hose to the skimmer

When the hose is completely filled with water, the end of the hose installs to the bottom suction plate of your skimmer.

  1. Aspirate

The best automatic pool cleaner is now ready for use. If it is a manual pool vacuum, you can now drive by hand on the pool floor. An automatic pool vacuum works with the negative pressure of the filter system.

It thus moves independently on the pool floor and changes its direction of travel automatically. Just make sure the filter system has enough power to generate the necessary negative pressure.

Cleaning Device For An Above-Ground Swimming Pool

The Most Commonly Used Vacuum Cleaners Are:

The pressure vacuum cleaner which can be, depending on the model, either connected to the booster installed in the technical room, or to the discharge nozzle.

  • The electric vacuum cleaner that runs on battery.
  • The hydraulic vacuum cleaner plugs into the skimmer or the brush holder. The necessary energy is then supplied to it by the swimming pool pump.

Very simple, the pool robot is a must since it requires no connection.

Principle of Operation

The pool vacuum must be immersed in water after being:

  • Either plugged into a sealed part of the pool,
  • Either charged if it is a battery model.

Then just pass it in the same way as you would with the vacuum cleaner that is intended for home maintenance. Take the time also to vacuum the corners of the bottom of the pool where debris can accumulate, and scrub all the walls of the pool with a brush. Generally, the pool vacuum cleaner is sold with this type of accessory. The fact that it is equipped with a telescopic handle dramatically facilitates the cleaning of the basin.

The vacuum cleaner on battery has an additional advantage compared to the vacuum cleaner swimming pool without a bag nor feeding system because, not being connected to the filtration system of the swimming pool, it does not risk to favor its clogging.

A Specific Case of The Cleaning Device For An Above-ground Swimming Pool

The tubular above-ground pool is an exception, as is the freestanding version. Both can be cleaned using a pool broom with a venturi effect connected by a specific nozzle to the garden hose that is generally used for plant irrigation. The system proves to be effective because when combined, the pool brush turns into a real vacuum cleaner. Indeed, by passing through the pipe whose diameter is relatively small, the water causes a very effective suction phenomenon.

Connection of A Pool Vacuum Cleaner, Precautions To Be Taken

Although the use of a vacuum cleaner for the swimming pool does not pose any particular difficulty, that does not exempt from respecting specific rules when connecting it. This will depend in part on the excellent result of a cleaning session. It is, therefore, advisable to proceed as follows:

  • First, immerse the hose of the pool vacuum cleaner,
  • Wait until it is filled with water: this step is crucial because by completely filling the pipe, the water expels air. However, the suction phenomenon can only take place if the pipe is empty of air.
  • Then immerse broom and hose in the pool and make sure to keep them perfectly vertical,

As soon as the water is ejected from the hose, obstruct the hole by hand and connect the hose to the brush outlet. The device is finally ready for use.

Budget To Plan For A Pool Vacuum Cleaner

Between the fully autonomous automatic pool vacuum cleaner and the hydraulic pool vacuum cleaner, the budget for this type of device is hugely variable. For comparison, the first fully equipped can exceed a thousand euros for a high-end model. In comparison, the second is accessible from 70 euros for an entry-level knowing that the must of the category costs around 220$.

But, although it is an essential element of comparison for equal quality, the price is not the only criterion for choosing a pool vacuum cleaner. Besides, it is not useful to afford the most expensive model if you have a tiny pool. Similarly, opting for the cheapest of all pool vacuums is not the best solution because it may not be powerful enough to maintain a large pool.


Please enter your comment!
Please enter your name here